Several years ago, Jon Cornell designed the world's
most powerful exhaust for the Yamaha Vmax. Since then, many have tried to
copy the design but have yet to duplicate it. Do not be fooled by these imitations,
the UFO exhaust, with the Cornell Core, is the original!
UFO would like to thank one of our old pals "Mario"
for helping us promote our exhaust. "Mario" recently removed
the Kerker exhaust he always promoted, and sold to many of you, on the
internet, at prices that were a "steal". It seems after getting
his ass kicked by his buddy "Bill", who has the original UFO
4/2 exhaust for the past year, he has now installed a cheap imitation
of our product. With Dyno results like the ones shown at the bottom
of the page, we would like to offer thanks for helping us prove that
we have the superior exhaust on the planet. The pipe he promotes is
a design stolen from UFO, produced by a fly-by-night company interested
only in your dollar, not your performance. The material will
rust out. The coating will peel off and the
pipes will crack. Our pipes, on the other hand,
are made from the highest quality materials available with a ceramic
fiberglass packing that won't burn out. They are also the only VMAX
pipes in the world that have 2.5 inch exits with show quality polished
304 stainless steel slash cut mufflers or classic style megaphones,
offering the highest level of performance. These pipes have the lowest,
deepest note to ever billow out of a VMAX engine. Remember, good pipes
aren't cheap, and cheap pipes aren't good! Below are the Dyno runs comparing
the UFO pipes to a Kerker in a sorry state of tune by it's owner and
the "Wannabee" 4/2 pipes now on Mario's bike, as well as a
handfull of the sorry souls. We at UFO give you All
the information available on product comparisons. Facts... proven on
the Dyno, not opinions of misguided theives out to take your money and
offer no support . You can either ride with "Bill" or follow
like "Mario".
Don't just listen to us, hear what our customers are saying...
If
the exhaust sound didn't start with this page, click here!
Click on each image for a larger picture.
| 
The Cornell Core Exhaust now comes in Show Polished Stainless
Steel Slash Cuts, Show Polished Stainless Steel Dual Slash Cuts
or Classic Megaphones.
All have Whopping 2.5" Exits.
(Another UFO Exclusive!)
|
|
StreetPro Series Slash Cut
|
|
|
 |
|
 |
 |
|
Quadzilla Dual Slash Cut (Double the Small Block
Chevy Sound!!!)
|
|
|
 |
|
 |
 |
|
Classic Megaphone
|
|
|
 |
|
 |
 |
|
Product Comparisons
|
|
.JPG)
|
|
| The image on the left shows the single
piece smooth radius on a UFO pipe. The image on the right shows the
split radius with extra seams that our competitors use. Simply stated,
the UFO pipe has a better fit and finish! |
|
 |
|
Above Left: The Kerker's from "Mario's"
bike and the UFO's from "Bill's" bike.
(Note the 17 hp difference in our favor!)
Above Right: UFO 4/2 versus the poorly done knock off exhaust. 117.6
hp for UFO and aproximately 107 hp for the competition. You do the
math!
|
Our pipes are mandrel bent and tig welded for greater
flow. They are ceramic coated so they will not rust. The slash cut mufflers
are made of show polished 304 stainless steel. All exhaust
systems are equipped with with the 2.5 inch Cornell Core. And yes, you
get to keep your center stand and it will clear the oil filter. The
StreetPro and Classic Megaphone exhaust systems are priced at $995.00.
The Quadzilla is an additional $295.00. All systems are available for
immediate shipment!
If you are a current UFO Exhaust owner and you want
to upgrade, no problem! The new UFO mufflers are compatible with our
existing systems and are sold as upgrade kits below. The StreetPro and
Classic Megaphones are $195.00 each and the Quadzilla mufflers are sold
as a set for $495.00.
Available for Secure Online Purchase.
UFO Vmax Full Exhaust Options:
UFO Vmax Exhaust Muffler Upgrade
Options:
|
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
.JPG', 559, 419);)
;)
;)